How to Select the Correct Configuration
- Define pump models, simultaneous/staged operation and target flow at pressure.
- Confirm tank flange, depth, port direction and strainer clearance.
- Size independent wiring, relays/fuses and bulkhead pins.
- Verify regulator, return line and fuel temperature under low-demand operation.
Dual-Pump Fuel-System Architecture
This dual-pump hanger must be matched to the complete hydraulic, electrical and tank interface.
- Confirm pump body size, retention, strainer clearance, tank opening, flange pattern, depth and service access.
- Define feed, return and vent ports together with filter, regulator, line-size and staging requirements.
- Size sealed electrical bulkheads, wire gauge, relays, fuses and charging capacity for measured current at operating pressure.
- Validate fuel temperature, return capacity, sender geometry, venting and sealing materials.
Customization and Supply Options
Available configurations are confirmed against the approved drawing, performance target, fuel specification and order requirements.
- Pump clamps
- Staged plumbing
- Feed/return ports
- Sender
- Bulkhead connector
- Flange
Frequently Asked Questions
1.Should both pumps run continuously?
Not always. A staged strategy can reduce heat and electrical load when full flow is unnecessary.
2.Can different pumps be mixed?
Only with an approved hydraulic and electrical design. Matched pumps are generally easier to control.
3.Can the hanger include a sender?
Yes, with tank geometry and the required resistance curve.
4.What information is needed for an accurate quotation?
Send the target fuel, operating voltage, required flow at maximum pressure, installation dimensions, inlet/outlet, connector, duty cycle and estimated annual volume.
5.Can the product be customized for private-label supply?
Yes, within the approved platform. Available options may include pump clamps, staged plumbing, feed/return ports, sender, bulkhead connector. Final scope, validation, MOQ and tooling are confirmed in the quotation.
Request a Quote and Technical Review
Tell us how you plan to use the Universal Dual-Pump Fuel Hanger Assembly for High-Flow EFI Systems. Send the application, fuel, operating pressure and flow requirement, voltage, installation details and order quantity. We will confirm the suitable configuration and quotation scope.
